Wire Shot
It is made of high-carbon steel wire.
It has the shape of a cylinder with a height equal to the diameter of its base.
Chopped wire shot has sharp edges, which gives high efficiency when cleaning surfaces with a high degree of rust or removing coatings of large thickness. The accuracy of the geometry and the absence of defects in the internal microstructure of particles takes shot blasting to a new level.
Form
The shot has a cylindrical shape (0.3 – 2.5 mm) with a height equal to the diameter, which gives the best abrasive properties and allows you to get a high speed of shot blasting
The high hardness of the material makes it possible to triple the life of the abrasive in comparison with cast or crushed shot, which significantly reduces the cost of abrasive treatment, reduces dust formation and filtration costs.
Application
It is used in processes:
-
Shot blasting;
-
Deburring;
-
Removal of impurities;
-
Scale removal;
-
Rust Removal;
-
Obtaining the necessary surface roughness.
In the production of the following product groups:
- Metal products
- Steel structures
- Forged products
- Hot Rolled steel (sheet, bars and profiles)
- Steel castings
Characteristics
Packaging and labeling
Plastic bags of 25 kg, packed in a cardboard box of 1 ton on a wooden pallet covered with plastic wrap and tightened with PET tape. Or big-bag bags of 1 ton each on a wooden pallet.
Specifications
Size range: 0.3mm to 2.5mm
Hardness 450-650 HV1
Standards: GOST 11964; DIN 8201
Carbon content (C)0.45 - 0.85%
Fraction size |
Compliance with the requirements of standards |
Chemical Composition |
Mechanical Characteristics |
|
0.40 mm / 0,016" 0.60 mm / 0,023" 0.80 mm / 0,032" 1.00 mm / 0,040" 1.20 mm / 0,047" 1.40 mm / 0,055" 1.60 mm / 0,063" 1.80 mm / 0,071" 2.00 mm / 0,079" 2.20 mm / 0,086" 2.40 mm / 0,094" 2.60 mm / 0,102" |
DIN 8201 – 4 SAE J-441 EN ISO 11124-5 GOST 11964-81
|
С: 0.45 – 0.85 % Si: 0,15 – 0,35 % Mn: 0,30 – 1,30 % S: до 0,040 % P: до 0,050 % |
Hardness: |
400 - 500 HV (41 - 49 HRC) 500 - 600 HV (49 - 55 HRC) 600 - 700 HV (55 - 60 HRC) |
Specific Gravity: |
approx. 7.86 g/cm3 |
|||
Bulk weight: |
approx. 4.6 g/cm3 |
You can find all the information about our products in the uploaded catalogue. There you may become acquainted with detailed information on each product field, technical specifics of every product and our reference projects. If you cannot find your product of interest, do not hesitate to contact us and we will do our best to meet your requirements.
Product catalog