Rolled steel for cold heading with special finishing, in coils

Rolled products are made of high-quality structural carbon and alloy steel according to GOST 10702, EN 10263, international standards or according to technical specifications agreed with the customer.

How to buy

Specifications

Packaging and labeling

Purpose

Rolled products are intended for the manufacture of products by cold extrusion and heading (fasteners, small rod, etc. products of complex shape).

Characteristics

Packaging and labeling

 

Packaging

Delivery status
Charted rolled products	Annealed rolled products		Packaging
	The full annealing	A spheroid. annealing	Without conservation	With conservation	Soft without preservation	Soft with preservation
+	+	+	+	+	+	+

Specifications

 

Technical parameters of rolled products:

Ø rolled, mm	Ø skein inside, mm	Ø skein outside, mm	Skein weight, kg	Package weight, tons
7,65÷25,2	700 ÷ 1100	900 ÷ 1400	100 ÷ 830	0,1 ÷ 5,0

Mechanical properties of rolled products — according to GOST 10702, EN 10263 or according to agreed technical specifications or TS

Precision quality and Surface quality:

Rolled precision (quality)	Surface quality group
h9; h10; h11; h12	G; D

Limit deviations according to GOST 14955:

Diameter, mm	Maximum deviations by quality, mm
	h9	h10	h11	h12
9,00 – 10,00	-0,036	-0,058	-0,090	-0,150
10,25 – 11,00	-0,043	-0,070	-0,110	-0,180
11,25 – 18,00	-0,043	-0,070	-0,110	-0,180
18,50 – 24,00	-0,052	-0,084	-0,130	-0,210
25,00 – 30,00	-0,052	-0,084	-0,130	-0,210
31,00 – 50,00	-0,062	-0,100	-0,160	-0,250

Rolled surface quality according to GOST 14955:

Steel surface finishing group	Qualifications	Surface roughness according to GOST2789-73		Name of permissible surface defects	Maximum depth of permissible defects
		Parameter Ra, microns no more	Base length, mm
A	h5, h6, h7,	0,32	0,25	Defects are not allowed	Defects are not allowed
	h8, h9, h10
B	h6, h7, h8,	0,63	0,8
	h9, h10, h11
C	h7, h8, h9, h10, h11	1,25	0,8
G	h8, h9, h10, h11	2,5	0,8	Individual defects of mechanical origin	½ of the maximum deviation in diameter
D	h9, h10, h11, h12	-	-	Individual defects of mechanical origin	Maximum deviation in diameter
E	h8, h9	-	-	Longitudinal risks	½ of the maximum deviation in diameter

For clients

Service сenter 

Certificates 

Please connect

Phone:
8 8202 53-91-91
8 800 350-39-14

E-mail:
info@severstalmetiz.com Please connect